Osmo Liquid Wax Cleaner Product Info

Purchase Osmo Liquid Wax Cleaner

PRODUCT DESCRIPTION
Osmo Liquid Wax Cleaner is specially designed for initial cleaning, occasionally refreshing, and maintenance of wooden surfaces treated with Osmo Polyx®-Oil in the interior.
Osmo Liquid Wax Cleaner regenerates and cleans at the same time. It is easy to use and allows a quick and economical application. It is also suitable to easily remove heavy stains.

RECOMMENDED USE
Osmo Liquid Wax Cleaner is ideal for removing tough stains, e.g. grease or shoe polish, and best suited for refreshing all surfaces treated with Osmo Polyx®-Oil.

CONTAINS
Based on natural, vegetable waxes (carnauba and candelilla wax), dearomatized white spirit (benzene-free). Complies with Environment Canada VOC regulations (SOR/2009-264). Full declaration of ingredients upon request.

TECHNICAL DATA
Specific gravity: 0.77-0.8 g/cm3

Viscosity: >30s DIN EN ISO 2431/3 mm, viscid Odour: faint/mild, odorless after drying
Flashpoint: >60°C acc. DIN EN ISO 2719

STORAGE
Up to 5 years and longer if the container is kept dry and

closed tightly. If thickened by frost, store for 24-36 hours at room temperature before use. 

SURFACE PREPARATION
The wood surface must be dust-free and dry. For this purpose generally a dust mop, a mop or a vacuum cleaner is suitable. For simple cleaning and maintenance, Osmo Cleaning Kit for Floors (Dust-Mop, Micro-Mop Plush, and an Active Fibre Cloth) is highly recommended.
For cleaning high-traffic and dirty flooring, e.g. in public spaces, use Osmo Micro-Mop (water mixed with Osmo Wash and Care) and buffed dry afterward.

DIRECTIONS FOR USE
Shake before use. Do not dilute. First clean the wood surface with a cloth, mop, or vacuum cleaner as usual. Areas that have been treated with Osmo Polyx®-Oil can be cleaned with a damp cloth (add Osmo Wash and Care to the cleaning water) and wipe dry as usual to avoid moisture penetration into the joints.
To remove heavy stains: Apply a small amount on a cloth and rub the dirty area – for heavier stains use a Scothchpad. Wipe off the dirt residues.
To maintain: Apply very thinly on the clean surface. 2 teaspoons will cover approx. 11 ft2. Can be polished.

CLEANING OF TOOLS
With Osmo Brush Cleaner and Thinner (free of aromatic compounds).

DRYING TIME
Approx. 30-40 minutes (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.

COVERAGE

Product coverage of Osmo Liquid Wax Cleaner strongly depends on the absorption and on the level of contamination on the substrate. 1.0 Liter will cover approx. 860-1076 ft2 (80-100 m2) with one application. 

NOTE
Through the routine application of hard waxes (car-

nauba and candelilla waxes), the flooring is refreshed and its resistance to stains and wear is improved. However, it is absolutely essential in the course of years to reapply the necessary oil ingredients in Polyx®-Oil to the floor. Only use very sparingly otherwise traffic marks may appear.

Use Osmo Liquid Wax Cleaner White only on white substrates. In especially high traffic areas, refinish the cleaned area with Osmo Polyx®-Oil.

HAZARD STATEMENTS

Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children. Use only in a well-ventilated area. FIRST AID TREATMENT. Contains aliphatic hydrocarbons. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. 

DISPOSAL
Dispose of leftover product and completely empty packaging according to local official guidelines (waste code number 08 01 11). Only completely emptied cans can be recycled.

COLOUR TONES
3029 Clear
3087 White Transparent

SIZES
Liquid Wax Cleaner: 500mL; 1 L; 10 L; 25 L Liquid Wax Cleaner White: 500m L; 1 L

The above-mentioned information is provided to the best of our knowledge however without any liability. 

Still need help? Contact Us Contact Us